Shop parts by
3 terminal, dual winding replacement flipper coil for the following Willia...
CALIFORNIA WARNING
This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
3 terminal, dual winding flipper coil with 1N4004 diodes used on Williams / Bally games.
FL-11629 high flipper strength, parallel coils, used on mostl Williams WPC system pinball games (original blue coil wrapper)
Primary winding (power) ~4 ohms (no diode)Secondary winding (hold) ~132 ohms (no diode)
Williams / Bally pinball machines flippers are designed for a balance of power based on the layout of a given game. Always use the specified coil number for your machine.
Always install a flipper rebuild kit before changing coils. The factory recommends a complete flipper rebuild every 500,000 cycles or flips.
But if you must adjust flipper strength, here is a list of coil numbers and their relative strength going from weakest to strongest:
FL-11753 Yellow - Used with short flippers and close shots
FL-11722 Green - Used for close shots near drop targets
FL-11630 Red - The standard, most commonly used coil
FL-15411 Orange - Used for long playfield shots
FL-11629 Blue - Used for long shots and high ramps
Reference:
FL-11629
23-2002-00
Wico 01-095500
JJP 23-2002-00
All coils include new sleeves (coil tubing) where applicable.
Select manufacturer to view game compatibility
Variable temperature soldering station
Solder - Pocket Dispenser 14 gram tube 60/40 tin/lead
2-3/16 x 1/2 inch coil sleeve. Replaces 545-5388-00
Soldering Station - tip kit 4 piece assortment
Solder - 100 gram spool .6mm 60/40
3 terminal, dual winding flipper coil is used on the following games:...
Wire-type soldering tip cleaner for use with soldering iron tips
Solder flux pen
3 terminal, dual winding flipper coil is used on the following machines:...
All-new flipper parts kit is the answer for sluggish flipper assemblies.
Flipper rebuild kit Williams 1988-1991 A-13524-1