ADDAMS FAMILY (Bally) Hole Guard chair

This is the formed stainless steel Hole Guard with 3/8" bezel for Bally ADDAMS FAMILY, ADDAMS FAMILY GOLD, and Williams ROAD SHOW ("Start City Event hole) pinball machines .

The extended frame lip covers existing playfield damage and protects the wood from further ball impacts. The radius edge provides fewer exposed edges, covers marred hole corners, and provides an aesthetically pleasing look.

Installation Instructions:

1. Raise playfield.2. Locate the 2 nuts that hold the Electric Chair posts in place. Remove these 2 nuts and save.3. Lower the playfield.4. Carefully lift out the entire Electric Chair assembly. If it is tight, you may have to wiggle it to loosen.5. Place the Hole Guard in place. It's OK to squeeze the sides slightly to help insertion. The holes in the Guard should align with the playfield post holes.6. Replace the Electric Chair assembly.7. Raise the playfield.8. Replace the 2 nuts that hold the Electric chair posts and tighten.9. Lower the playfield and play!