Shop parts by
Williams NO GOOD GOFERS pinball machine drive disc assembly. Refere...
This product is not currently available.
CALIFORNIA WARNING
This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
Williams NO GOOD GOFERS pinball machine drive disc assembly.
Ships un-assembled
Reference:
A-21786 complete driven disc spin assemblyA-16120 DC motor control03-9691 driven disc04-10912 base plate14-7955-1 motor31-2957 disc decalA-22026 motor 2 opto board
Select manufacturer to view game compatibility
NO GOOD GOFERS (Williams) Disc
NO GOOD GOFERS (Williams) Spin base plate
NO GOOD GOFERS (Williams) Mounting plate
Williams NO GOOD GOFERS pinball machine spinning disc motor.
Shaft 1/4 x 2-9/16 inches
Screw adjust assy
Flange - plastic
Locking nut - plastic
Spacer #8 x .541 inch
Screw adjust assy
Machine Screw M3 x .5 x 6mm lg p-ph
Machine screw 8-32 thread x 5/8" long phillips flat head.
Machine Screw 8-32 x 1" long pan head phillips with external tooth lockwas...
Nut 10-32 elastic stop nut/ntm
Washer .187 x .437 x .053 inch #8 SAE
Williams NO GOOD GOFERS pinball machine decal for spinning disc with textu...
Machine screw 8-32 x 1/2" long unslotted 1/4" drive hex head with external...
Sheet Metal Screw #8 x 1/2" p-pn type 25
fw .219X.500X.063
Motor cable 4 pin 8 inch
Williams Motor Controller board assembly. Also used in: TWILIGHT ZONE...
NO GOOD GOFERS (Williams) Disc opto board
