Shop parts by
SHADOW (Bally) Rack & pinion kit
CALIFORNIA WARNING
This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
New, nylon rack & brass core pinion repair kit for Bally THE SHADOW pinball machine.
Includes new plastic rack with fasteners, brass core pinion gear, roll pins and hex key tool for installation.
Installation instructions:
Tools required: Phillips screwdriver, .06 inch diameter pin punch, pliers.Remove paddle diverter motor and use a .06" (1/16 inch) diameter pin punch to extract the roll pin from existing pinion gear.Loosen the pinion gear set screw with included hex wrenchReplace with new pinion gear and tighten the set screw firmly. Install new roll pin in the set screw with a clamp or pliers.Remove original rack and replace with new rack. DO NOT overtighten the screws securing the rack or it will crack.
Reference:
03-9231 rack mini playfieldA-20267-RP
Select manufacturer to view game compatibility
SHADOW (Bally) Coil sleeve kit
4 piece set of ribbon cables for Bally THE SHADOW pinball machine.
SHADOW (Bally) Post kit
LED lamp complete conversion kit for Bally THE SHADOW.
This is the 18 piece WHITE rubber ring set for Bally SHADOW. Includes whit...
Bally SHADOW pinball machine drop target with riveted metal cap top.
SHADOW (Bally) Plastic rack
Bally THE SHADOW pinball machine mini-playfield motor and gearbox assembly...
Pin punch 1/16 inch diameter
Pin punch 3/32 inch diameter
Pin punch 1/8 inch diameter