Shop parts by
Left plunger, link and crank (pawl) assembly used on all new Stern1 games
CALIFORNIA WARNING
This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
Left plunger, link and crank (pawl) assembly used on all new Stern1 games. It is compatible with older Data East / Sega games.
Includes:
Flipper plunger and link sub assembly - 515-6304-03
Crank Bar - 530-5070-02
Switch Actuator (LEFT) sub assembly - 515-7257-01
Set Screw - 237-6144-00
Reference:
515-7203-01
Replaces 515-6518-01
Replaces 515-6305-01 old style crank arm
1 NOTE:
Stern Electronics, Inc. made pinball machines between 1977 and 1984 and their products are commonly referred to as Classic Stern or Early Stern pinball machines.
Stern Pinball, Inc. was established in 1999 and currently manufactures pinball machines referred to as New Stern pinball machines.
Most parts used by these 2 different companies and generations of pinball machines are not interchangeable with each other.
Select manufacturer to view game compatibility
Right plunger, link and crank (pawl) assembly used on all new Stern1 games...
Flipper rebuild kits for late model Sega & post 2000 Stern pinball machine...
Plunger and link assembly for Data East/ Sega / Stern flipper assemblies.
Plunger is 2-23/64 in (60 mm) overall lenth x 7/16 in (11 mm) diameter. Re...
Flipper plunger bushing Stern .16 x .281 x .187 inch
Spiral pin 5/32 inch x 3/4 inch roll pin
Flipper plastic link Stern SPI
End-of-stroke switch actuator arm for left side flipper assembly.
Flipper crank bushing Stern .192 x .312 x .195 inch
Flipper crank shoulder screw 8-32 x 3/16 dia x 7/16 inch long shaft
