Flipper assembly Data East left 090-5020-30
CALIFORNIA WARNING
This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
Data East left side flipper assembly with 090-5020-30 coil.
Ships un-assembled.
Reference:
500-5693-02 left side500-5693-01 right side
Hex spacer Post 3/8 x 1/4 inches #6-32 tap both ends.
Stop, CRY Nylon Flipper
Bracket, spring left flipper assembly for: Data East Pinball Machines
Elastic Stop Nut used on rod and ring (A-4754) assemblies.
Machine screw with 6-32 thread and 1 inch long with phillips pan head.
Cap - red plastic actuator Data East
Nut with 10-32 thread and elastic stop top (esn) 238-1306-00
Flipper plunger link used in Data East games.
Machine screw with 6-32 thread and 5/8 inch long with phillips pan head.
Split roll pin 5/32 x 7/16 inch. Reference: 251-5000-00
Rubber grommet used on many Vertical Up Kicker (VUK) and Knocker assemblies.
Bushing/spacer is used in flipper assemblies on games built prior to...
Sheet metal screw #8 x 3/8" unslotted hex washer head. Reference: 41...
Coil bracket notched flipper
Spring washer 1/2 inch inner diameter and 3/4 inch outer diameter commonly used on...
Plunger & link assembly for later Bally and Williams machines.
Machine Screw 1/4-20 x 3/8 inch socket head R/A 231-2507-06
Bracket, spring right flipper assembly for Data East Pinball Machines. Replaces the 535-6421-00
Data East / Sega / Stern flipper solenoid coil with diode.
Shoulder bolt 8-32 x 7/16 inch shaft
Data East and early Sega plunger and crank assembly with improved link. Fi...
Flipper base plate DE/Sega/Stern left
Data East / Sega coil stop bracket
Crank arm block
6-32 X 3/8 slot hex washer head machine screw. Replaces the 4006-01059-06
Flipper bushing DE/Sega/Stern
Flipper return extension spring used on Data East, Sega, and New Stern
Metal flipper switch spring bracket for many Data East pinball machines
Scew. 232-2206-12
Flipper plunger link used in Data East games.
Shoulder bolt 10-32 x 7/16 inch shaft
