Shop parts by
3/8-16 hex machine screw nut, steel & zinc 5/8 across flats
CALIFORNIA WARNING
This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
3/8-16 thread hex machine screw nut, steel & zinc 5/8 inch across flat sides x 1/4 inch tall.
Used to lock leg levelers and other bolts in place. Also called a JAM nut.
This is the correct lock nut for Williams pinball machine leg levelers. Uses the same 5/8 inch open end wrench to fasten leg bolts and leg leveler lock nuts.
Reference:
4422-01117-00
Replaces LLN
Replaces Gottlieb FA-665 Jam Nut
Select manufacturer to view game compatibility
Standard 3/8 - 16 steel zinc finished hexnut. 9/16" across flats X 21/64 inch tall
Nut 3/8-16 esn stop nut M-319-7
Nut 3/8-16 hex 9/16 flat to flat 7/32 inch thick
Wrench - box/open end 5/8 inch
Standard pinball machine leg leveler with 3/8 inch -16 thread and 3 inch long shaft
Wrench - box/ratchet 5/8 + 9/16 inch leg bolts
Socket wrench dual drive ratchet 3/8 and 1/2 inch
Rivnut hex 3/8-16 x .845 inch
Standard 28-1/2 inch ribbed pinball machine leg with chrome finish for William...
Socket wrench set 3/8 inch drive 21 pc.
Socket wrench set 52 pc. SAE and Metric
Wrench - socket ratchet 1/4 inch
Socket wrench handle - palm ratchet 3/8 square 1/4 hex inch
Deep socket set 1/4 inch drive 9 piece METRIC
Deep socket set 1/4 inch drive 9 piece SAE
Soft drive 5/8" socket
