Shop parts by
Machine screw with 2-56 thread and 3/4" long with phillips pan head and in...
CALIFORNIA WARNING
This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
Machine screw with 2-56 thread and 3/4" long with phillips pan head and integrated internal tooth lockwasher.
Basic diameters and threads of Standard SAE numeric system small machine screws are shown below.
The diameters of machine screws are indicated with the number of threads per inch count.
Here is a list of common sizes in inches:
2-56: 0.0860" or 43/500" in diameter; 56 threads per inch
4-40: 0.1120" or 14/125" in diameter; 40 threads per inch
5-40: 0.1250" or 1/8" in diameter; 40 threads per inch
6-32: 0.1380" or 69/500" in diameter; 32 threads per inch
8-32: 0.1640" or 41/250" in diameter; 32 threads per inch
10-32: 0.1900" or 19/100" in diameter; 32 threads per inch
10-24: 0.1900" or 19/100" in diameter; 24 threads per inch
12-24: 0.2160" or 27/125" in diameter; 24 threads per inch
Select manufacturer to view game compatibility
Screwdriver 4" phillips mag tip
Machine screw with 2-56 thread and 5/8 inch long with phillips pan head.
Nut 2-56 hex.
Screwdriver 3" phillips mag tip
This is the small phillips panhead screw used to secure most playfield mic...
2-56 nylock steel zinc nut
Small phillips pan-head screw used to secure most playfield switches.
