Shop parts by
Super-Bands™ sleeve 7/8 inch white
CALIFORNIA WARNING
This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
White gloss polyurethane Super-Bands™ bumper post sleeve is 1/4 Inner Diameter x 1/2 Outer Diameter x 7/8 inches tall.
Fits all of the following bumper post part numbers:
02-403602-4036-202-405702-4659-102-482902-484202-484302-493202-5140530-5057-00530-5332-01530-5332-02530-5332-03530-5332-04SM00145-05
and others.
Super-Bands™ are modern polyurethane bumpers and rings for pinball machines that play better and last longer than traditional rubber. Tested by professional pinball players and commercial operators, Super-Bands™ are proven to reduce maintenance and increase playability in all pinball machines. Super-Bands™ are carefully engineered to maintain the same rebound, or bounce, of traditional soft 45-durometer rubber that pinball designers and professional players prefer.
More Durable: Advanced customized polyurethane compound is more resistant to abrasion, ozone, and ultraviolet light than traditional rubber.
Replaces these factory part numbers:
Williams #23-6552-1
Sega / Stern / Data East #545-5009-00
Bumper post hex base 8-32 x 2 inch
Post - hex base 8-32 tap / 8-32 thread
Metal post with #8-32 thread stud top, #10-32 thread on bottom.
Metal post with hex base #6-32 tap and #10-32 thread on bottom.
Bumper post 10-32 x 2-1/4 inch
Bumper post 8-32 x 2-1/4 inch
Bumper post m-m 6-32 top /8-32 base studs
Post - coin toss
Bumper post with a 3/8" hex base and 8-32 bottom thread stud and 6-32 top.
Bumper post with hex base with 8-32 threaded bottom with 6-32 top hole
Metal bumper post #10
Metal bumper post 6-32 x 3/8 inch tap top
Bumper post 10-32 bottom stud
Metal post 8-32 bottom stud
Metal bumper post has 8-32 bottom and plain top and uses 23-6552 or 23-655...
Yellow bumper post rubber sleeve is 7/8" high.
Rubber sleeve - black 7/8 inch
Bumper post 8-32 stud 6-32 tap
