Shop parts by
This is the thicker, improved gray flipper link.
CALIFORNIA WARNING
This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
New oval shape gray plastic flipper link used with the extension return flipper spring. 4.6mm thick.
Oval link is used on later flipper assemblies.
The newer style oval link will not work properly with the conical shaped spring.
Maintenance tip: Note that it is highly recommended to change the entire plunger & link assembly when the link is broken. The plunger and coil stop are usually worn to the point where the additional distance traveled by the plunger stresses and breaks the link. This typically occurs after an estimated 500,000 flip cycles. See the associated plunger & link assembly or flipper rebuild kit under related items below.
Reference:
03-8753 oval link 4.6mm thick
03-8050 tapered link 4mm thick
03-8050-1 tapered link 4.3mm thick
10-364 flipper return extension spring
Coil Plunger
Split roll pin 5/32 x 7/16 inch. Reference: 251-5000-00
Older style flipper link.
This is the old style flipper link used with the conical compression fl...
Plunger & link assembly for later Bally and Williams machines.
Hourglass shape flipper plunger link for Data East pinball machine flipper
