Shop parts by
Plastic thickness gauge for adjusting flipper bushing gap
CALIFORNIA WARNING
This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
Flipper adjustment feeler gauge.
Are your flipper shafts properly adjusted? This plastic feeler gauge is used to adjust the gap between the flipper shaft and bushing to 0.03 inches on Bally / Williams flipper assemblies.
Incorrectly adjusted flipper shafts can prematurely wear out bushings and reduce ball control.
Durable polystyrene feeler gauge has hole for key ring.
Raise the playfield
Slip the prongs of the gauge between the flipper bushing and the flipper crank assembly.
Loosen the flipper crank assembly and adjust it such that the gauge can smoothly slide around the shaft.
If the gauge snags, the crank assembly is too tight
If the gauge has too much space, the crank assembly is too loose.
Reference:
03-8194
Select manufacturer to view game compatibility
3" steel contact file set of 2
Rubber - flipper 1/2 inch wide x 1-1/2 inch red
Black flat rubber O-ring for standard flippers.
Switch Adjuster Tool set 3 piece
All-new flipper parts kit is the answer for sluggish flipper assemblies.
Flipper rebuild kit Williams 1988-1991 A-13524-1
Metal thickness gauge
